Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Parking Brake System: Service and Repair
Removal
Note: The parking brake control must be fully released.
1. Put the transmission in gear and release the parking brake control.
2. Raise and support the vehicle.
Transmission Mounted Parking Brake
3. Disconnect and lubricate.
-
Disconnect the (A) parking brake lever return spring from the (B) parking brake lever.
-
Apply penetrating oil, such as Penetrating Lubricant E8AZ-195A501-B or equivalent, at the (C) adjusting clevis, jam nut and the threads of the
front parking brake cable and conduit.
4. Disconnect the front parking brake cable and conduit
-
Loosen the (A) jam nut.
-
Remove the (B) clevis pin locking pin.
-
Remove the (C) clevis pin.
-
Remove the (D) adjusting clevis from the (E) parking brake lever.
