Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Crankshaft Main Bearing: Specifications
Torque Specifications and Procedures
Torque Specifications - Crankshaft Main Bearing Bolts
Vertical
Tighten the bolts in two steps in the sequence shown.
-
Step 1: Tighten to 40 Nm (30 ft. lbs.).
-
Step 2: Tighten an additional 90 degrees.
Side Bolts
Install the side bolts and tighten in two steps, in the sequence shown.
-
Step 1: Tighten to 27-33 Nm (20-24 ft. lbs.).
-
Step 2: Tighten an additional 85-95 degrees.