Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Blower Motor Resistor: Description and Operation
Blower Motor Resistor Coils
Blower Motor Thermal Limiter
The heater blower motor switch resistor has the following features:
-
The assembly is located on the passenger side of the vehicle on the evaporator housing.
-
Three resistance elements are mounted on the resistor board to provide four A/C blower motor speeds.
-
Depending on the heater blower motor switch position series resistance is added or bypassed in the A/C blower motor circuit to decrease or
increase A/C blower motor speed.
-
An overheating protective device (thermal limiter) will open the resistor coil circuit when the temperature reaches 121°C (250°F) interrupting the
blower motor operation in all speeds except HI.
-
The thermal limiter cannot be reset and is not serviceable.
