Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Compressor Fitting HVAC: Service and Repair
REMOVAL
1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Drain the engine cooling system.
4. Remove the drive belt.
5. Remove the fan shroud.
6. Disconnect the A/C pressure cut-off switch electrical connector.
7. Disconnect the compressor suction line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
8. Disconnect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
9. Raise and support the vehicle.