Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
6. Remove the A/C clutch field coil.
1. Note the location of the A/C clutch field coil electrical connector.
2. Install the Shaft Protector for Coil Removal on the nose opening of the A/C compressor.
3. Install the Differential Side Bearing Puller.
4. Remove the A/C clutch field coil.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
INSTALLATION
1. Clean the A/C clutch field coil and pulley bearing mounting surfaces.
2. Install the A/C clutch field coil.
1. Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector properly positioned.
2. Place the Field Coil Replacer on the A/C clutch field coil.
Place the Coil Pressing Tool on the Field Coil Replacer.
3. Use the 2-Jaw Puller to install the A/C clutch field coil until bottomed completely against the A/C compressor.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
3. Install the A/C clutch pulley.
NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head; it must be properly aligned during installation.