Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
1. Remove the floor/defrost door vacuum control motor.
1. Disconnect vacuum lines.
2. Remove the screws.
3. Lift the vacuum control motor off the door crank.
4. Remove the vacuum control motor.
2. Remove the floor/panel door vacuum control motor.
1. Disconnect the vacuum line.
2. Remove the screws.
3. Lift the vacuum control motor off the door crank.
4. Remove the vacuum control motor.
3. Remove the vacuum lines.
ASSEMBLY
1. Follow the disassembly procedure in reverse order.
