ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/C Hose/Line|Page 5966 > < Hose/Line HVAC|Specifications|Page 5963
Page 1
background image

Hose/Line HVAC: Service and Repair
A/C Hose/Line

Auxiliary A/C-Heater System

REMOVAL

1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Partially drain the engine cooling system.
4. Remove the engine air cleaner (ACL) and the air cleaner outlet tube.

5. Disconnect the condenser core refrigerant lines.

1. Disconnect the compressor discharge line.
2. Disconnect the condenser to evaporator tube.

CAUTION:  Use a wrench on each side of the fitting to prevent damage to the A/C fitting.

6. Disconnect the A/C evaporator core fitting.

1. Remove the screw.
2. Disconnect the A/C evaporator core fitting.

7. Remove the four clamps.

1. Remove the screw.
2. Remove the clamp.

8. Raise the vehicle.

A/C Hose/Line|Page 5966 > < Hose/Line HVAC|Specifications|Page 5963