ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Warning Buzzer Module (RV Only)|Page 6884 > < Initial Inspection and Diagnostic Overview|Page 6879
Page 1
background image

Audible Warning Device Control Module: Service and Repair
Warning Buzzer Module (RV Only)

REMOVAL 

1. Disconnect battery ground cable.

CAUTION:  Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

2. Remove the engine cover.

3. Remove the warning buzzer module.

1

Rotate the buzzer module 90 degrees.

2

Pull the buzzer away from the bracket.

3

Disconnect the electrical connector from the buzzer and remove the buzzer module.

INSTALLATION 

1. To install, reverse the removal procedure.

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

Warning Buzzer Module (RV Only)|Page 6884 > < Initial Inspection and Diagnostic Overview|Page 6879