ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid - Differential > < Fluid - A/T|Capacity Specifications|Page 1130
Page 5
background image

7. Install the (A) pan with gasket. Alternately tighten the (B) bolts.

8. Connect the connector.
9. Remove the supports and lower the vehicle.

10. Connect the battery ground cable.
11. Refill the transmission.

1. Add 6.2 liters (6.5 quarts) of MERCON(R) V Automatic Transmission Fluid XT-5-QM or MERCON(R) V equivalent transmission fluid to the

transmission through the fluid filler tube.

2. Start the engine. Move the transmission range selector lever through all the gear ranges, checking for engagements.
3. Check and adjust the transmission fluid, in 0.24 liter (0.5 pint) increments, to the proper level (cross-hatched area of the fluid level indicator at

normal operating temperature.

CAUTION:  Use only MERCON(R) V Automatic Transmission Fluid XT-5-QM or MERCON(R) V equivalent. The use of any other fluids
can result in the transmission failing to operate in a normal manner or failure.

Fluid - Differential > < Fluid - A/T|Capacity Specifications|Page 1130