Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
9. Disconnect the underbody tube spring lock coupling.
10. Lower the vehicle.
11. Remove the condenser to evaporator tubes.
INSTALLATION
1. Service the replacement condenser to evaporator tube with the proper amount of Motorcraft YN-12c refrigerant oil or equivalent meeting Ford
specification WSH-M1C231-B.
2. Route the condenser to evaporator tube.
3. Raise the vehicle.
4. Connect the underbody tube spring lock coupling.
5. Lower the vehicle.
6. Connect tile A/C evaporator core fitting.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the
O-rings.
2. Connect the A/C evaporator core fitting.
3. Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
