Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
5. Disconnect the A/C evaporator core fitting.
1. Remove the screw.
2. Disconnect the A/C evaporator core fitting.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
6. Remove the condenser to evaporator tube.
INSTALLATION
1. Service the replacement condenser to evaporator tube with the proper amount of Motorcraft YN-12c refrigerant oil or equivalent meeting Ford
specification WSH-M1C231-B.
2. Route the condenser to evaporator tube.
3. Connect the A/C evaporator core fitting.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the
O-rings.
2. Connect the A/C evaporator core fitting.
3. Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
4. Connect the condenser core refrigerant lines.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the
O-rings.
2. Connect the condenser to evaporator tube.
3. Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.