Econoline E350 1 Ton Information Bus Components (1998) Testing & Inspection
3. Twist and solder the wires together.
1
Install the heat shrink tube.
2
Twist 12.7 mm (0.5 in) of each wire together.
CAUTION: Use Resin Core Mildly Activated (RMA) solder. Do not use acid core solder.
4. Form (bend) the circuit into shape for sealing.
NOTE: Wait for the solder to cool before moving the wires.
5. Position the heat shrink tube over the splice.
6. Shrink the heat shrink tube on the exposed circuit with a heat gun.
1
Heat the heat shrink tube with the heat gun.
2
Remove the heat when the hot wax flows out of both ends of the heat shrink tube.