Econoline E350 V8-54L Engine Control Module - Service and Repair
Engine Control Module: Procedures
Powertrain Control Modules (PCMs) are reprogrammable to update calibration levels without having to replace the PCM.
The reprogramming may be performed with the PCM installed in the vehicle using the Service Bay Technical System (SBTS).
The PCM may also be reprogrammed outside of the vehicle using the New Generation STAR (NGS) and a 15- to 104- Pin Flash Cable (007-00587 or
equivalent). The Flash Cable connects between the NGS and the PCM. The proper calibration must be downloaded to the Data Transfer Card through
the SBTS. Follow the download instructions displayed on the NGS screen.
