ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Cruise Control Deactivation Switch Overheating|Page 446 > < Recall - Cruise Control Deactivation Switch Overheating|Page 444
Page 6
background image

TABLE OF CONTENTS

OVERVIEW

This Safety Recall involves an inspection of the Speed Control Deactivation Switch (SCDS) harness connector for the presence of brake fluid
contamination. If no brake fluid is present, install the universal fused jumper harness. If brake fluid is present, replace the SCDS and inspect the speed
control servo harness connector for heat damage. See Flow Chart # 2.

In addition, for 1999 through 2003 Windstar vehicles, the repair includes an inspection of the Anti-lock Brake System (ABS) connectors. See Flow Chart
# 2.

If a related damage condition is found that you believe to be caused by a leaking SCDS, call the Special Service Support Center to request approval prior
to the repair of any related damage.

Requests for approval after completion of the repair will not be granted.

REPAIR FLOW CHARTS

Recall - Cruise Control Deactivation Switch Overheating|Page 446 > < Recall - Cruise Control Deactivation Switch Overheating|Page 444