ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Starting System- No Crank Condition|Page 4664 > < Neutral Safety Switch|Locations|Page 4655
Page 1
background image

Starter Cable: Customer Interest
Starting System- No Crank Condition

TSB 06-19-14

10/02/06

NO CRANK / STARTER TERMINAL FATIGUE

FORD:
1997-2007 Crown Victoria
1997-2004 F-150 Heritage
1997-2006 Expedition
1998-2006 E-Series
1999-2006 F-Super Duty
2002-2007 Explorer
2004-2006 F-150
2007 Explorer Sport Trac

LINCOLN:
1998-2006 Navigator
2003-2005 Aviator

MERCURY:
1997-2007 Grand Marquis
2002-2007 Mountaineer

ISSUE
Some vehicles may exhibit a no crank condition due to an open circuit in the starter relay to starter motor circuit at the starter motor connection.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

A new starter terminal wiring pigtail kit is released eliminating the need to replace the entire harness for the terminal connection.

NOTE

TERMINAL KIT ONLY SERVICES THE STARTER RELAY TO STARTER MOTOR CIRCUIT. THE KIT DOES NOT SERVICE STARTER
MOTOR BATTERY POWER CIRCUIT.

Refer to instruction sheet contained in Wiring Pigtail Kit for wiring harness service procedure.

NOTE

REFERENCE THE APPROPRIATE WORKSHOP MANUAL SERVICE SECTION 303-06 FOR REMOVAL AND INSTALLATION OF THE 
STARTER MOTOR WIRING TERMINAL CONNECTION PROCEDURES.

Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage

OPERATION

DESCRIPTION

TIME

061914A

Install Wiring Pigtail kit (Do

0.4 Hr.

Not Use With 14200A)

MT061914

Claim Additional Labor

Actual

Required As Actual Time

Time

Or Use SLTS Operation If
Available

DEALER CODING

Starting System- No Crank Condition|Page 4664 > < Neutral Safety Switch|Locations|Page 4655