Center Support Clutch Replacement - Econoline E350 1 Ton V8-54L Prop SOHC VIN Z (1998)
Clutch: Service and Repair
Center Support Clutch
Special Tools
DISASSEMBLY
1. Using the (A) O-Ring Tool, remove and discard the (B) direct clutch seal rings. Remove the (C) No. 6 center support thrust washer.
2. Inspect the following for contamination or damage. Clean or replace, as necessary.
-
No. 6 center support thrust washer (A).
-
Seal ring grooves (B).
-
Inner hub diameter (C).
-
Outer hub diameter (D).
-
Feed bolt threads (E).
-
Ball bearing (F).
ASSEMBLY
1. Follow the removal procedure in reverse order.
-
Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.