Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
7. Remove the coast clutch piston.
8. Remove the coast clutch piston outer seal.
9. Remove the coast clutch piston inner seal.
ASSEMBLY
NOTE: Soak all friction clutch plates for 15 minutes in clean MERCON(R) V Automatic Transmission Fluid XT-5-QM or MERCON(R) V
equivalent.
NOTE: Prior to installation, lightly lubricate all O-ring seals with clean MERCON(R) V Automatic Transmission Fluid XT-5-QM or MERCON(R)
V equivalent.
1. Install the coast clutch piston inner seal.
NOTE: Make sure the seal lip faces the coast clutch cylinder.
