Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
7. Raise the transmission jack until the (A) transmission insulator and retainer studs are separated from the (B) transmission support crossmember.
8. Remove the (A) bolts and the (B) transmission insulator and retainer.
9. Disconnect the (A) harness connector and position it aside. Remove the (B) bolt and the (C) vehicle speed sensor (VSS).
10. With a suitable drain pan properly positioned, remove the 8 (A) bolts, the (B) stud and the (C) extension housing.
NOTE: Super Duty applications use a special 4x4 extension housing.
NOTE: As the fasteners are removed, note the size of each for proper location during installation.
