ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid - A/T|Capacity Specifications|Page 3552 > < Fluid - A/T|Capacity Specifications|Page 3550
Page 1
background image

Fluid - A/T: Service and Repair

REMOVAL 

1. Disconnect the battery.

WARNING:  ON VEHICLES EQUIPPED WITH AN AUXILIARY BATTERY, BOTH THE NEGATIVE AND POSITIVE BATTERY
CABLES MUST BE DISCONNECTED.
 

WARNING:  ON VEHICLES EQUIPPED WITH A 7.3L ENGINE, BOTH THE PRIMARY AND SECONDARY BATTERIES MUST
BE DISCONNECTED.
 

2. Raise and support the vehicle.

3. Disconnect the connector.

4. Remove the transmission fluid pan and the gasket.

1. Loosen, but do not remove, the bolts.
2. Remove the front and side bolts.
3. Lower the front of the fluid pan and allow the fluid to drain.
4. Remove the remaining bolts and the fluid pan.

NOTE:  Do not discard the gasket unless damaged. This is a reusable gasket.

Fluid - A/T|Capacity Specifications|Page 3552 > < Fluid - A/T|Capacity Specifications|Page 3550