Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
7. Using the O-Ring Tool, remove the intermediate clutch piston outer seal.
ASSEMBLY
1. Install the intermediate clutch piston outer seal, with the lip seal facing upward.
NOTE: Prior to reassembly, inspect the check ball, the cup plugs and the feed bolt threads for contamination or damage. Clean or replace, as
necessary.
2. Install the intermediate clutch piston inner seal, with the lip seal facing downward toward the cylinder.
3. Install the intermediate clutch piston.
NOTE: The piston should rotate freely in the cylinder.
