Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Parking Pawl: Service and Repair
REMOVAL
NOTE: For internal park mechanism service.
1. Remove the extension housing and the extension housing gasket.
2. Remove the (A) bolts and the (B) parking rod guide plate.
3. Remove the (A) parking pawl return spring, the (B) parking pawl and the (C) parking pawl shaft.
INSTALLATION
1. Install the (A) parking pawl shaft, the (B) parking pawl and the (C) parking pawl return spring with the spring end resting on the inside of the case.
2. Install the (A) parking rod guide plate with the (B) bolts.