Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
5. Remove the (A) bolts and the (B) digital transmission range (TR) sensor.
6. With a suitable drain pan properly positioned, drain, then remove the transmission fluid pan and remove the gasket.
1. Loosen, but do not remove, the 20 fluid pan-to-case retaining bolts.
2. Remove the 15 front and side fluid pan-to-case retaining bolts.
3. Lower the front of the fluid pan and allow the fluid to drain.
4. With the fluid pan properly supported, remove the (A) bolts and the (B) fluid pan and gasket.
CAUTION: Do not discard the gasket unless damaged. This is a reusable gasket.
7. Remove the filter and seal assembly by carefully pulling and rotating the filter as necessary.
NOTE: After removal, discard the filter and seal assembly.
