Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Shift Cable: Adjustments
NOTE: The 4R70W transmission is shown, this procedure is also used for the E40D transmission.
1. Place the transmission range selector lever in the (D) position.
-
Place a three-pound weight on the transmission range selector lever.
2. Raise and support the vehicle.
3. Disconnect the shift cable at the manual control lever.
4. Unlock the lock tab on the transmission shift cable.
5. Verify the manual control lever is in the Overdrive position.
1. Place the manual control lever in the first gear position.
2. Move the manual control lever two detents to the Overdrive position.
6. Connect the transmission shift cable to the manual control lever.
