Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
Torque Converter: Service and Repair
Flushing
1. Following the instructions included with the Torque Converter/Transmission Oil Cooler Cleaner, flush the torque converter.
CAUTION: Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.
2. After flushing, drain the remainder of the solvent through the converter drain plug.
3. Add 1.9 liter (2 quart.) of clean MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent MERCON(R) V approved fluid into the
converter fluid filler tube and agitate by hand.
4. Thoroughly drain the solution.
