Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
3. Remove the rear cooler tube, from the rear CBV fitting.
4. Remove the front line case fitting.
NOTE: The two rubber coated sealing washers can fall out during removal of the front line case fitting.
5. Remove the rear line case fitting.
NOTE: The two rubber coated sealing washers can fall out during removal of the rear line case fitting.
6. Remove and clean the CBV.
INSTALLATION
1. Examine the rubber coated sealing washers for damage. Replace the washers as needed.
CAUTION: Make sure the 4 rubber coated sealing washers are on the cooler line case fittings and the CBV washers are in place. Do not over
tighten.
2. Using Thread lock and Sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 coat the line case fitting threads.
