Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
4. Raise the transmission jack until the (A) retainer studs are separated from the (B) transmission support crossmember.
5. Remove the (A) bolts and the (B) retainer.
INSTALLATION
1. Install the (A) retainer and the (B) bolts.
2. Lower the transmission jack while aligning the (A) retainer studs with the holes in the (B) transmission support crossmember. Allow the full
weight of the transmission to rest on the transmission support crossmember.
