Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
5. Disconnect the connector.
CAUTION: Check the electrical connectors for terminal condition, corrosion and contamination. Repair or replace as required.
6. Disconnect the connector.
7. With a suitable drain pan properly positioned, drain, then remove the transmission fluid pan and remove the gasket.
1. Loosen, but do not remove, the bolts.
2. Remove the 15 front and side fluid pan-to-case bolts.
3. Lower the front of the fluid pan and allow the fluid to drain.
4. With the fluid pan properly supported, remove the (A) bolts and the (B) fluid pan and gasket.
NOTE: Do not discard the gasket unless damaged, This is a reusable gasket.
8. Remove the filter and seal assembly by carefully pulling and rotating the filter as necessary.
