Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
21. Coat the inside of the rear axle universal joint flange with a small amount of rear axle lubricant WSP-M2C197-A or equivalent and install the rear
axle universal joint flange on the drive pinion shaft.
-
For Model 80, use the Companion Flange Replacer.
22. Install the washer and nut.
NOTE: Whenever the rear axle universal joint flange is removed, the pinion washer and pinion nut must be replaced.
23. Install the axle shafts.
NOTE: For semi-float rear axles, remove the differential pinion shaft lock bolt and the differential pinion shaft.
24. Install the axle housing cover.
-
Apply Silicone Rubber E7TZ-19562-A or equivalent meeting Ford specification ESL-M4G273-A to the surface of the axle housing cover.