Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
13. Use the Dial Indicator with Bracketry to recheck the backlash.
-
If the backlash is within specification, go to Step 14. If the backlash is not within specification, repeat Step 9.
14. Remove the bearing caps and bolts.
-
To establish differential bearing preload, increase both left and right shim sizes by the specification shown in the illustration.
-
Use the Shim Driver to ensure that the differential bearing shims are fully seated and the assembly turns freely.
15. Install the bearing caps and bearing cap bolts.