Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
6. Install progressively larger shims on the right side until the largest shim selected can be assembled by hand.
7. Install the right side bearing cap, and tighten the bolts.
8. Rotate the differential case to make sure it rotates freely.
9. Use the Dial Indicator with Bracketry to measure ring gear backlash.
-
If the backlash is within specification, go to Step 15. The specification shown in the illustration is the total allowable range.
-
If a zero backlash condition occurs, go to Step 10.
-
If the backlash is not within specification, go to Step 11.
