Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
15. Install the differential pinion shaft in the differential case. Install the differential pinion shaft lock pin. For Model 60 semi-float axles, tighten the
differential pinion shaft lock bolt finger-tight. After axle shaft installation, tighten the differential pinion shaft lock bolt to specification.
16. Install the ring gear to the differential case, if required.
Model 70 (Dual Rear Wheels)
DISASSEMBLY
NOTE: When the axle lubricant has been drained for rear axle repair (limited slip only), refill the rear axle with the specified quantity of Premium
Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification WSP-M2C197-A and add 0.163 L (5.5 ounces) of Ford Friction
Modifier C8AZ-1913546-A or equivalent friction modifier meeting Ford specification EST-M2C118-A.
1. Mark the differential case.
1. Mark the flange (ring gear) half and button (cover) half of the differential case for reassembly in the same positions.
2. Mark the differential pinion shafts and their corresponding ramps for reassembly in the same positions.
