Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
4. Remove the speed sensor ring, if required.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
5. Use the 2-Jaw Puller for Differential Case Bearings and the Step Plate Adapter to remove the differential bearing.
-
Repeat for the other side.
6. Remove the differential pinion shaft lock bolt and remove the differential pinion shaft.
7. Remove the differential clutch spring.
WARNING: DUE TO THE SPRING TENSION, CARE MUST BE USED WHEN REMOVING THE DIFFERENTIAL CLUTCH
SPRING
