Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
ASSEMBLY
1. Prelubricate each steel clutch plate and soak all friction plates with additive Ford Friction Modifier C8AZ-19B546-A or equivalent meeting Ford
specification EST-M2C118-A for at least 15 minutes.
CAUTION: 118 ml(4 oz) of the specified Ford Friction Modifier must be used in the axle.
2. Assemble the differential clutch packs (without the shims) on the respective differential side gears
CAUTION: Do not mix the differential clutch packs or shims from one side with the other.
3. Place the base portion of Traction-Lok Clutch Gauge in a vise. Install the differential clutch pack and differential side gear (without the shim) on
the gauge.