Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
DISASSEMBLY
1. Remove the differential case.
2. Remove the differential pinion shaft lock bolt and remove the differential pinion shaft.
-
If required, remove the ring gear and anti-lock speed sensor ring.
NOTE: The differential bearings need not be removed to overhaul the Ford limited slip differential. If bearing removal is required, use the
2-Jaw Puller for Differential Case Bearings.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
3. Install the Traction-Lok Torque Tool in a suitable vise.
4. Install the differential case on the tool.