Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
1. Place the Step Plate on the ring gear side bearing to protect the bearing during the installation of the drive pinion side bearing.
2. Drive the bearing onto the drive pinion side hub, using the Differential Bearing Cone Replacer.
12. Install the Differential Housing Spreader and the Dial Indicator/Magnetic Base or Dial Indicator with Bracketry to the rear axle differential carrier.
Remove the indicator.
CAUTION: Do not spread the rear axle differential carrier over 0.38 mm (0.015 inch).
