Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
11. If the pinion bearing cups are to be replaced, tap alternately (with a brass drift of suitable length) on the opposite side of the cups during removal
to prevent cups from cocking in the casting.
NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
INSTALLATION
1. Drive the outer pinion bearing cup into the axle housing, using the Pinion Bearing Cup Replacer (Outer) and the Driver Handle.
2. Drive the inner pinion bearing cup into the axle housing, using the Pinion Bearing Cup Replacer (Inner) and the Driver Handle.
3. Make sure the cups are properly seated in their bores.
CAUTION: Whenever the cups are replaced, the differential pinion bearings must also be replaced.