Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
7. Inspect the No. 4 overdrive planet thrust bearing assembly.
1. Remove the No. 4 overdrive planet thrust bearing assembly. Wash the thrust bearing thoroughly in cleaning solvent. Blow dry the bearing with
compressed air and lubricate with clean transmission fluid. Replace any bearing and race that show sign of wear.
2. Inspect the pinion shafts in the planet assembly. They should be checked for looseness and damage.
3. Inspect the pinion gears for damaged and free rotation.
4. Inspect the planet carrier for damage.
CAUTION: Use care not to damage the thrust bearing.
NOTE: The individual parts of the planet assemblies are not repairable.
8. Push out the unitized plastic cage and the inner race.
9. Inspect the rollers or sprags, springs and cage for excessive wear or damage.
Remove the inner race.
NOTE: Inspect the outer and inner races for scores or damaged surface areas where the rollers or sprags contact the races.
ASSEMBLY
