Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
4.
Slowly peel back clear top sheet. See Figure 4. The AS1 lettering and surrounding blue field should remain on windshield.
If the entire blue field did not transfer to the windshield, remove the blue field with luke warm water. Make sure the windshield is completely dry and at
room temperature (approximately 70°F), then return to Step 1 of the "APPLICATION OF STENCIL."
APPLICATION OF ETCHING CREAM
1.
Shake/stir etching cream thoroughly.
WARNING:
DO NOT GET ETCHING CREAM OUTSIDE BLUE FIELD OF THE STENCIL, AS DAMAGE TO THE WINDSHIELD WILL OCCUR.
