Econoline E350 1 Ton V8-5.4L SOHC VIN L (1999)
3. Using the Forcing Screw, Bushing Remover and Receiver Cup, remove the axle pivot bushing.
Installation
1. CAUTION: The new pivot bushing must be free of grease, oil or other contamination.
Position the new pivot bushing.
NOTE: The flanged end of the pivot bushing faces the front of the vehicle.
Position spacing washers, the Receiver Cup, Forcing Screw, Bushing Replacer, and the new pivot bushing on the front axle.
2. Press the new pivot bushing into the front axle, leaving the specified clearance between the pivot bushing flange and the front axle.
3. Position the front axle, bolt and nut into the pivot bracket. Tighten the nut hand-tight.
4. Install the front coil spring.