Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
Exhaust Manifold: Service and Repair
Left Side
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Raise and support the vehicle.
4. Remove the two nuts and bolts retaining the turbocharger exhaust inlet pipe to the exhaust manifold.
5. Lower the vehicle.
6. Remove the eight exhaust manifold bolts and the exhaust manifold.
7. Clean the exhaust manifold mating surfaces.
8. Using a straightedge, check the exhaust manifold
INSTALLATION
1. Apply anti-seize compound to the exhaust manifold bolt threads.
2. Install the exhaust manifold and retaining bolts.
3. Raise and support the vehicle.
