Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
7. Remove the A/C manifold and tube.
1. Loosen the screw.
2. Remove the A/C manifold and tube.
INSTALLATION
1. Service the replacement A/C manifold and tube with the proper amount of Motorcraft YN-12c refrigerant oil or equivalent meeting Ford
specification WSH-M1C231-B.
2. Install the A/C manifold and tube.
1. Lubricate the new A/C manifold O-rings with Motorcraft YN-l2c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B
and install the O-rings on the A/C compressor.
2. Install the A/C manifold and tube.
3. Apply Pipe Sealant with Teflon(R) D8AZ-19554-A or equivalent meeting Ford specification WSK-M2G350-A2 to the threads of the A/C
manifold retaining bolt and install the bolt.
3. Connect the compressor discharge line.
1. Lubricate the new A/C manifold O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B
and install the O-rings.
2. Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.