Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
9. Install the four clamps.
1. Install the clamp.
2. Install the screw.
10. Install the engine air cleaner and the air cleaner outlet tube.
11. Fill the engine cooling system.
12. Reconnect the battery ground cable.
13. Using proper procedures, evacuate and charge the A/C system. See: Heating and Air Conditioning/Service and Repair/Evacuation and Charging
Standard A/C
REMOVAL
1. Using proper procedures, recover the refrigerant.
2. Disconnect the battery ground cable.
3. Remove the engine Air Cleaner (ACL) and the air cleaner outlet tube.
4. Disconnect the condenser core refrigerant lines.
1. Disconnect the compressor discharge line.
2. Disconnect the condenser to evaporator tube.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
5. Disconnect the A/C evaporator core fitting.
1. Remove the screw.
2. Disconnect the A/C evaporator core fitting.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
6. Remove the condenser to evaporator tube.
INSTALLATION
