Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
7. Momentarily loosen the forcing screw.
NOTE: This step is very important to relieve the pressure of the rear axle disc and plate kit.
8. Retighten the forcing screw until a very slight movement of the differential pinion gears is seen.
NOTE: When attempting to rotate the differential side gear, some tightening or loosening of the forcing screw will probably be required to permit
gear movement.
9. Insert the Driver Handle into the bore of the differential pinion shaft and rotate the differential case until the differential pinion gears can be
removed through the large openings in the differential case.
10. Using one hand to retain the top differential side gear and rear axle disc and plate kit in the differential case, remove the forcing screw.
11. Continue to hold the differential side gear and the rear axle disc and plate kit, and remove the gear rotating tool.