Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
Windshield Washer Pump: Service and Repair
REMOVAL
1. Raise and support the hood.
2. Remove the battery.
3. Remove the battery tray.
1
Remove the bolts.
2
Remove the battery tray.
4. Remove the washer pump and reservoir.
1
Remove the nut.
2
Remove the bolt.
3
Disconnect the filler hose.
4
Disconnect the electrical connector.
5
Detach the wiring harness locator from the washer pump and reservoir.
6
Disconnect the windshield washer hose.
7
Remove the washer pump and reservoir.
NOTE: Windshield washer fluid must be collected in a container after the windshield washer hose is disconnected.