Econoline E550 V10-6.8L VIN S (2003)
6. Remove the brake pads and rail clips.
7. Measure the rear brake disc thickness. Install a new rear brake disc if not within specification.
8. Inspect the rear disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
9. NOTE: Use a block of wood or brake pad to protect the brake caliper pistons and boots.
Compress the brake caliper pistons.
1. Remove the inboard disc brake pad.
2. Remove the outboard disc brake pad and clip.
10. To install, reverse the removal procedure.
