Econoline E550 V10-6.8L VIN S (2003)
8. Remove the brake master cylinder.
9. To install, reverse the removal procedure.
-
Bleed the brake system.
Brake Master Cylinder - Hydro-Max, E-550
Brake Master Cylinder - Hydro-Max, E-550
Removal and Inatallation
CAUTION: Do not depress the brake pedal while the hydraulic fluid supply line is disconnected. The inlet pressure port check ball may be dislodged
which will result in a non-functional backup system.
1. Disconnect the battery ground cable.
2. Remove the support bracket bolt and nut.
3. Disconnect the brake tubes.
4. Remove the ground wire nut and the ground wire.