Econoline E550 V10-6.8L VIN S (2003)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley
Special Tool(s)
Removal
1. Remove the engine cooling fan and fan shroud.
2. Remove the drive belt.
3. Raise and support the vehicle.
4. Remove the crankshaft pulley bolt.
5. Using the special tool, remove the crankshaft pulley.
Installation
1. NOTE: If not secured within four minutes, sealant must be removed and the sealing area cleaned with metal surface cleaner. Allow to dry until
there is no sign of wetness, or four minutes, whichever is longer. Failure to follow this procedure can cause future oil leakage.
Apply silicone gasket and sealant to the Woodruff key slot on the crankshaft pulley.