Econoline E550 V10-6.8L VIN S (2003)
8. Disconnect the compressor manifold and tube assembly from the condenser and remove the compressor manifold and tube assembly.
^
Discard the O-ring seal.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
INSTALLATION
1. To install, reverse the removal procedure.
^
If a new compressor manifold and tube assembly is to be installed, transfer the pressure cutoff switch to the new compressor manifold and tube
assembly.
^
Lubricate the refrigerant system with the correct amount of clean PAG oil.
^
Install new O-ring seals lubricated in clean PAG oil.
2.
Evacuate, leak test, and charge the refrigerant system.