Econoline E550 V10-6.8L VIN S (2003)
12. Disconnect the heater blower motor switch resistor electrical connector.
13. Remove the screws and the evaporator core housing support bracket.
14. Remove the evaporator core housing.
1
Remove the seven nuts.
2
Remove the evaporator core housing.
NOTE: The use of an assistant may be necessary to remove the evaporator core housing.
INSTALLATION
1. Install the evaporator core housing.
1
Install the evaporator core housing.
2
Install the seven nuts.
NOTE: The use of an assistant may be necessary for the installation of the evaporator core housing.