Econoline E550 V10-6.8L VIN S (2003)
6. Position the RH lower instrument panel finish panel reinforcement. Install the bolts.
7. Align the retaining clips and install the RH lower instrument panel finish panel.
All vehicles
8. Remove the restraint system diagnostic tool from the harness side of the clockspring electrical connector at the top of the steering column.
9. Install the driver air bag module.
1. Connect the horn electrical connector.
2. Connect the driver air bag module electrical connector.
3. Position the driver air bag module into the steering wheel.
4. Install the two bolts.
5. Install the two steering wheel back cover plugs.